Mobile data collector
Innotas Elektronik GmbH offers mobile data collectors for reading in "Walkin" or "Walkby" operation of the end devices.

The end devices such as EHKV or water meter attachments with the wM-Bus radio option transmit the consumption data in the set time range at short transmission intervals. The reader can then receive the devices within this transmission window. Depending on the quality of the radio link, reading is also possible without entering the building, for example from a vehicle. The recipients are responsible for receiving transmission protocols
wM-Bus standard and therefore also suitable for receiving data from end devices from other manufacturers with this radio standard
Some important key data:

Funksystem wM-BUS T/S-Mode

ideal for WalkBy

Sender / recipient

USB supply

Can be connected to mobile via OTG adapter
Documents / software:

data sheet

MDC (Meter Device Commander)
wM-BUS Gateway
The wM-Bus gateway receives wireless M-Bus protocols in T / C / S mode, filters them as required, stores them and sends them to a server via an IP connection.

The gateway has no mobile data connection. It only uses existing networks. The gateway is particularly suitable for stationary reception of wM-BUS protocols using an existing internet connection. Internet routers are usually already in place. Usually nothing needs to be changed on the router.
Simply plug the gateway into the router's USB connection (optionally with a USB power supply unit) and connect it to the router with a network cable.

The gateway can optionally be parameterized via a website, USB interface or via the wM-BUS gateway server.
The received wM-BUS protocols can be filtered in the device in advance according to manufacturer, medium code and / or according to individual IDs.
The gateway sends the received and filtered data to the server either immediately, hourly, daily or monthly.
The free "wM-BUS to TCP Gateway Server" or an application developed by the user can be used as a server.